Filament Comparison Tool
Compare two filament types side by side — nozzle temp, bed temp, fan, retraction, and printability. Data averaged across 416 profiles for PETG and 0 profiles for Nylon.
Print settings (averaged from real profiles)
| Setting | PETG | Nylon |
|---|---|---|
| Nozzle temp (recommended) | 235°C | — |
| Nozzle temp (range) | 220–250°C | — |
| Bed temp (recommended) | 66°C | — |
| Bed temp (range) | 61–76°C | — |
| Cooling fan | 21–75% | — |
| Print speed | 61 mm/s | — |
| Retraction distance | 0.56 mm | — |
| Retraction speed | 40 mm/s | — |
Based on 416 PETG profiles and 0 Nylon profiles in the database.Browse all material settings →
Material properties
| Property | PETG | Nylon |
|---|---|---|
| Heat resistance (HDT) | ~75°C | ~110°C |
| Enclosure needed | Not needed | ⚠ Required |
| Moisture sensitivity | Medium | ⚠ High — dry before use |
| Ease of printing | ★★★★☆ Easy | ★★☆☆☆ Hard |
| Post-processing | Difficult to sand | Sand, dye |
| Nozzle requirement | Brass OK | Hardened steel |
| Typical cost | $20–28/kg | $30–50/kg |
PETG
Chemical resistant. Strings more than PLA.
View PETG settings database →Nylon
High strength. Absorbs moisture quickly.
View Nylon settings database →