Filament Comparison Tool
Compare two filament types side by side — nozzle temp, bed temp, fan, retraction, and printability. Data averaged across 744 profiles for PLA and 0 profiles for Nylon.
Print settings (averaged from real profiles)
| Setting | PLA | Nylon |
|---|---|---|
| Nozzle temp (recommended) | 215°C | — |
| Nozzle temp (range) | 190–230°C | — |
| Bed temp (recommended) | 59°C | — |
| Bed temp (range) | 54–69°C | — |
| Cooling fan | 38–97% | — |
| Print speed | 66 mm/s | — |
| Retraction distance | 0.54 mm | — |
| Retraction speed | 40 mm/s | — |
Based on 744 PLA profiles and 0 Nylon profiles in the database.Browse all material settings →
Material properties
| Property | PLA | Nylon |
|---|---|---|
| Heat resistance (HDT) | ~55°C | ~110°C |
| Enclosure needed | Not needed | ⚠ Required |
| Moisture sensitivity | Low | ⚠ High — dry before use |
| Ease of printing | ★★★★★ Easiest | ★★☆☆☆ Hard |
| Post-processing | Sand, prime, paint | Sand, dye |
| Nozzle requirement | Brass OK | Hardened steel |
| Typical cost | $18–25/kg | $30–50/kg |
PLA
Best starter material. Brittle under impact.
View PLA settings database →Nylon
High strength. Absorbs moisture quickly.
View Nylon settings database →