PETG filament settings
Food-safe, impact resistant, slight flex. Great all-rounder. Below are slicer settings for PETG across 19 supported printers.
Bambu Lab
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| A1 256×256×256 mm | 235°C | 60°C | 0.4, 0.6, 0.8 mm | 5 | View settings → |
| A2L | 235°C | 60°C | 0.4, 0.6 mm | 3 | View settings → |
| H2C | 235°C | 60°C | 0.4, 0.6 mm | 5 | View settings → |
| H2S | 235°C | 60°C | 0.4 mm | 5 | View settings → |
| H3C | 235°C | 60°C | 0.4, 0.6, 0.8 mm | 5 | View settings → |
| P1P 256×256×256 mm | 235°C | 60°C | 0.4 mm | 2 | View settings → |
| P1S 256×256×256 mm · Enclosed | 235°C | 60°C | 0.4, 0.6, 0.8 mm | 3 | View settings → |
| X1 | 235°C | 60°C | 0.4, 0.6, 0.8 mm | 5 | View settings → |
| X2D | 235°C | 60°C | 0.6 mm | 5 | View settings → |
Creality
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| Ender 3 S1 220×220×270 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| Ender 3 V3 220×220×250 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| K1 220×220×250 mm · Enclosed | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| K1 Max 300×300×300 mm · Enclosed | 235°C | 80°C | 0.4 mm | 1 | View settings → |
Prusa
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| MK3S+ 250×210×210 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| MK4 250×210×220 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| Mini+ 180×180×180 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| XL 360×360×360 mm | 235°C | 80°C | 0.4 mm | 1 | View settings → |
Voron
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| Trident 250×250×250 mm · Enclosed | 235°C | 80°C | 0.4 mm | 1 | View settings → |
| V2.4 300×300×280 mm · Enclosed | 235°C | 80°C | 0.4 mm | 1 | View settings → |