Filament Comparison Tool
Compare two filament types side by side — nozzle temp, bed temp, fan, retraction, and printability. Data averaged across 744 profiles for PLA and 0 profiles for PLA-CF.
Print settings (averaged from real profiles)
| Setting | PLA | PLA-CF |
|---|---|---|
| Nozzle temp (recommended) | 215°C | — |
| Nozzle temp (range) | 190–230°C | — |
| Bed temp (recommended) | 59°C | — |
| Bed temp (range) | 54–69°C | — |
| Cooling fan | 38–97% | — |
| Print speed | 66 mm/s | — |
| Retraction distance | 0.54 mm | — |
| Retraction speed | 40 mm/s | — |
Based on 744 PLA profiles and 0 PLA-CF profiles in the database.Browse all material settings →
Material properties
| Property | PLA | PLA-CF |
|---|---|---|
| Heat resistance (HDT) | ~55°C | ~60°C |
| Enclosure needed | Not needed | Not needed |
| Moisture sensitivity | Low | Low |
| Ease of printing | ★★★★★ Easiest | ★★★★☆ Easy |
| Post-processing | Sand, prime, paint | Sand carefully |
| Nozzle requirement | Brass OK | Hardened steel |
| Typical cost | $18–25/kg | $35–60/kg |
PLA
Best starter material. Brittle under impact.
View PLA settings database →PLA-CF
Stiffer than PLA. Abrasive — wears brass fast.
View PLA-CF settings database →