Filament Comparison Tool
Compare two filament types side by side — nozzle temp, bed temp, fan, retraction, and printability. Data averaged across 416 profiles for PETG and 258 profiles for ABS.
Print settings (averaged from real profiles)
| Setting | PETG | ABS |
|---|---|---|
| Nozzle temp (recommended) | 235°C | 245°C |
| Nozzle temp (range) | 220–250°C | 230–260°C |
| Bed temp (recommended) | 66°C | 76°C |
| Bed temp (range) | 61–76°C | 71–86°C |
| Cooling fan | 21–75% | 5–68% |
| Print speed | 61 mm/s | 61 mm/s |
| Retraction distance | 0.56 mm | 0.55 mm |
| Retraction speed | 40 mm/s | 40 mm/s |
Based on 416 PETG profiles and 258 ABS profiles in the database.Browse all material settings →
Material properties
| Property | PETG | ABS |
|---|---|---|
| Heat resistance (HDT) | ~75°C | ~90°C |
| Enclosure needed | Not needed | ⚠ Required |
| Moisture sensitivity | Medium | Low |
| Ease of printing | ★★★★☆ Easy | ★★☆☆☆ Hard |
| Post-processing | Difficult to sand | Acetone smooth, sand, paint |
| Nozzle requirement | Brass OK | Brass OK |
| Typical cost | $20–28/kg | $18–24/kg |
PETG
Chemical resistant. Strings more than PLA.
View PETG settings database →ABS
Styrene fumes. Needs enclosure.
View ABS settings database →