OTHER filament settings
Specialty or composite filament. Below are slicer settings for OTHER across 50 supported printers.
Anycubic
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| 4Max Pro | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| 4Max Pro 2 | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Chiron | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra 2 | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra 3 Max | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra Max | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra Plus | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Kobra S1 Max | 215°C | 76°C | 0.4, 0.6, 0.8 mm | 5 | View settings → |
| Kobra X | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Vyper | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| i3 Mega S | 215°C | 60°C | 0.4 mm | 1 | View settings → |
Bambu Lab
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| A1 256×256×256 mm | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| H2C | 215°C | 60°C | 0.6, 0.8 mm | 4 | View settings → |
| H2D | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| H2S | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| H3C | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| P1P 256×256×256 mm | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 2 | View settings → |
| P1S 256×256×256 mm · Enclosed | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| P2S | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| X1 | 215°C | 60°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
| X2D | 215°C | 60°C | 0.6, 0.8 mm | 4 | View settings → |
Creality
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| Ender-3 V3 | 215°C | 62°C | 0.4, 0.6, 0.8 mm | 5 | View settings → |
| Ender-3 V3 KE | 215°C | 50°C | 0.4 mm | 3 | View settings → |
| Ender-3 V3 Plus | 215°C | 69°C | 0.4, 0.6, 0.8 mm | 15 | View settings → |
| Ender-3 V3 SE | 215°C | 50°C | 0.4 mm | 3 | View settings → |
| Ender-3 V4 220×220×235 mm | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Hi | 215°C | 58°C | 0.4, 0.6, 0.8 mm | 6 | View settings → |
| K1 Max_CFS-C 300×300×300 mm | 215°C | 69°C | 0.4 mm | 15 | View settings → |
| K1 SE | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| K1 SE_CFS-C 220×220×250 mm | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| K1C | 215°C | 64°C | 0.4, 0.6, 0.8 mm | 16 | View settings → |
| K1C_CFS-C 220×220×250 mm | 215°C | 69°C | 0.4 mm | 15 | View settings → |
| K1_CFS-C 220×220×250 mm | 215°C | 69°C | 0.4 mm | 15 | View settings → |
| K2 | 215°C | 55°C | 0.4, 0.6, 0.8 mm | 10 | View settings → |
| K2 Plus | 215°C | 68°C | 0.2, 0.4, 0.6, 0.8 mm | 25 | View settings → |
| K2 Pro | 215°C | 58°C | 0.4, 0.6, 0.8 mm | 16 | View settings → |
| K2 SE 220×215×245 mm | 215°C | 60°C | 0.4 mm | 3 | View settings → |
| SPARKX i7 260×260×255 mm | 215°C | 55°C | 0.2, 0.4, 0.6, 0.8 mm | 4 | View settings → |
| Sermoon D3 300×250×300 mm | 215°C | 60°C | 0.4 mm | 1 | View settings → |
| Sermoon M300 300×300×200 mm | 215°C | 50°C | 0.4, 0.6, 0.8 mm | 4 | View settings → |
Qidi
| Printer | Nozzle temp | Bed temp | Nozzle sizes | Profiles | |
|---|---|---|---|---|---|
| Q1 Pro | 215°C | 60°C | 0.2, 0.4, 0.6, 0.8 mm | 11 | View settings → |
| Q2 | 215°C | 60°C | 0.2, 0.4, 0.6, 0.8 mm | 1 | View settings → |
| X-CF Pro | 215°C | 79°C | 0.4 mm | 10 | View settings → |
| X-Max | 215°C | 79°C | 0.4 mm | 9 | View settings → |
| X-Max 3 | 215°C | 73°C | 0.2, 0.4, 0.6, 0.8 mm | 11 | View settings → |
| X-Plus | 215°C | 79°C | 0.4 mm | 9 | View settings → |
| X-Plus 3 | 215°C | 73°C | 0.2, 0.4, 0.6, 0.8 mm | 11 | View settings → |
| X-Plus 4 | 215°C | 60°C | 0.2, 0.4, 0.6, 0.8 mm | 12 | View settings → |
| X-Smart 3 | 215°C | 73°C | 0.2, 0.4, 0.6, 0.8 mm | 11 | View settings → |