OTHER settings
Slicer settings for printing OTHER filament on the Qidi X-Max 3. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp215°C190–240°C range
Bed temp60°C55–70°C range
Fan speed100%Min 0%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 40 mm/s
Nozzle0.4 mmbrass
Source: Official profile. ✓ Verified against official profile.
All nozzle sizes
0.2 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Generic PVA Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Generic PVA Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PA12-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-GF Generic | 215°C 190–240°C | 80°C 75–90°C | 20% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PEBA 95A Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.8 mm @ 40 mm/s | Official profile |
| QIDI PET-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PET-GF Generic | 215°C 190–240°C | 80°C 75–90°C | 20% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-CF Generic | 215°C 190–240°C | 110°C 105–120°C | 30% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-GF Generic | 215°C 190–240°C | 90°C 85–100°C | 90% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI UltraPA-CF25 Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI WOOD Rapido Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.6 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Generic PVA Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PA12-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-GF Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PEBA 95A Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.8 mm @ 40 mm/s | Official profile |
| QIDI PET-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PET-GF Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-CF Generic | 215°C 190–240°C | 60°C 55–70°C | 30% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-GF Generic | 215°C 190–240°C | 90°C 85–100°C | 90% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI UltraPA-CF25 Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI WOOD Rapido Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.8 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Generic PVA Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PA12-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PAHT-GF Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PET-CF Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PET-GF Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-CF Generic | 215°C 190–240°C | 60°C 55–70°C | 30% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI PPS-GF Generic | 215°C 190–240°C | 90°C 85–100°C | 90% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI UltraPA-CF25 Generic | 215°C 190–240°C | 80°C 75–90°C | 40% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| QIDI WOOD Rapido Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
Tips for printing OTHER on the Qidi X-Max 3
- Always start with the recommended temperature and adjust in 5°C increments.
- Print a temperature tower to find the optimal temperature for your specific filament brand.
- Store filament in a dry box to maintain consistent print quality.