Anycubic Kobra S1 MaxOTHER settings

Slicer settings for printing OTHER filament on the Anycubic Kobra S1 Max. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Recommended settings (0.4 mm brass nozzle)

Nozzle temp215°C190–240°C range
Bed temp110°C105–120°C range
Fan speed40%Min 10%
Print speed60 mm/sStarting point
Retraction0.8 mmAt 40 mm/s
Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.4 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
Anycubic PA6-CF
Anycubic		215°C
190–240°C		110°C
105–120°C		40% /10%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PAHT-CF
Anycubic		215°C
190–240°C		100°C
95–110°C		40% /10%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PEBA
Anycubic		215°C
190–240°C		55°C
50–65°C		100% /100%60 mm/s1.6 mm @ 40 mm/sOfficial profile
Anycubic PET-CF
Anycubic		215°C
190–240°C		80°C
75–90°C		30% /10%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PVA
Anycubic		215°C
190–240°C		55°C
50–65°C		100% /100%60 mm/s0.6 mm @ 40 mm/sOfficial profile

0.6 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
Anycubic PA6-CF
Anycubic		215°C
190–240°C		100°C
95–110°C		100% /100%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PAHT-CF
Anycubic		215°C
190–240°C		100°C
95–110°C		100% /100%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Anycubic PEBA
Anycubic		215°C
190–240°C		40°C
35–50°C		100% /100%60 mm/s0.4 mm @ 40 mm/sOfficial profile
Anycubic PET-CF
Anycubic		215°C
190–240°C		80°C
75–90°C		100% /100%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Anycubic PVA
Anycubic		215°C
190–240°C		50°C
45–60°C		100% /100%60 mm/s0.8 mm @ 40 mm/sOfficial profile

0.8 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
Anycubic PA6-CF
Anycubic		215°C
190–240°C		100°C
95–110°C		100% /100%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PAHT-CF
Anycubic		215°C
190–240°C		100°C
95–110°C		100% /100%60 mm/s0.4 mm @ 40 mm/sOfficial profile
Anycubic PEBA
Anycubic		215°C
190–240°C		40°C
35–50°C		100% /100%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Anycubic PET-CF
Anycubic		215°C
190–240°C		80°C
75–90°C		100% /100%60 mm/s0.8 mm @ 40 mm/sOfficial profile
Anycubic PVA
Anycubic		215°C
190–240°C		50°C
45–60°C		100% /100%60 mm/s1 mm @ 40 mm/sOfficial profile

Tips for printing OTHER on the Anycubic Kobra S1 Max

  • Always start with the recommended temperature and adjust in 5°C increments.
  • Print a temperature tower to find the optimal temperature for your specific filament brand.
  • Store filament in a dry box to maintain consistent print quality.