Creality SPARKX i7OTHER settings

Slicer settings for printing OTHER filament on the Creality SPARKX i7. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Recommended settings (0.4 mm brass nozzle)

Nozzle temp215°C190–240°C range
Bed temp55°C50–65°C range
Fan speed80%Min 80%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 40 mm/s
Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.2 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
CR-Silk
Generic		215°C
190–240°C		55°C
50–65°C		80% /80%60 mm/s0.5 mm @ 40 mm/sOfficial profile

0.4 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
CR-Silk
Generic		215°C
190–240°C		55°C
50–65°C		80% /80%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Hyper Luminous
Generic		215°C
190–240°C		55°C
50–65°C		80% /60%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Hyper Marble
Generic		215°C
190–240°C		55°C
50–65°C		80% /60%60 mm/s0.5 mm @ 40 mm/sOfficial profile
Hyper Stardust
Generic		215°C
190–240°C		55°C
50–65°C		80% /60%60 mm/s1 mm @ 40 mm/sOfficial profile

0.6 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
CR-Silk
Generic		215°C
190–240°C		55°C
50–65°C		80% /80%60 mm/s0.5 mm @ 40 mm/sOfficial profile

0.8 mm nozzle

FilamentNozzle tempBed tempFanSpeedRetractionSource
CR-Silk
Generic		215°C
190–240°C		55°C
50–65°C		80% /80%60 mm/s0.5 mm @ 40 mm/sOfficial profile

Tips for printing OTHER on the Creality SPARKX i7

  • Always start with the recommended temperature and adjust in 5°C increments.
  • Print a temperature tower to find the optimal temperature for your specific filament brand.
  • Store filament in a dry box to maintain consistent print quality.