OTHER settings
Slicer settings for printing OTHER filament on the Creality K2 SE. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp215°C190–240°C range
Bed temp60°C55–70°C range
Fan speed100%Min 0%
Print speed60 mm/sStarting point
Retraction0.4 mmAt 40 mm/s
Nozzle0.4 mmbrass
Source: Official profile. ✓ Verified against official profile.
All nozzle sizes
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| CR-Silk Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.4 mm @ 40 mm/s | Official profile |
| Hyper Marble Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.8 mm @ 40 mm/s | Official profile |
| Hyper Stardust Generic | 215°C 190–240°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
Tips for printing OTHER on the Creality K2 SE
- Always start with the recommended temperature and adjust in 5°C increments.
- Print a temperature tower to find the optimal temperature for your specific filament brand.
- Store filament in a dry box to maintain consistent print quality.