What temperature for OTHER on the Anycubic Kobra 2?

Recommended nozzle temperature for OTHER on the Anycubic Kobra 2 is 215°C (range: 190–240°C). Bed temperature: 60°C.

What bed temperature for OTHER on the Anycubic Kobra 2?

Set the Anycubic Kobra 2 bed to 60°C for OTHER. The acceptable range is 55–70°C.

What retraction settings for OTHER on the Anycubic Kobra 2?

Use 0.5 mm retraction distance at 40 mm/s for OTHER on the Anycubic Kobra 2.

What fan speed for OTHER on the Anycubic Kobra 2?

Set the part-cooling fan to 100% for OTHER on the Anycubic Kobra 2. Minimum speed: 0%.

Anycubic Kobra 2OTHER settings

Slicer settings for printing OTHER filament on the Anycubic Kobra 2. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp215°C190–240°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PVA Generic	215°C 190–240°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Tips for printing OTHER on the Anycubic Kobra 2

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing OTHER on the Anycubic Kobra 2