What temperature for OTHER on the Flashforge Adventurer 5M?

Recommended nozzle temperature for OTHER on the Flashforge Adventurer 5M is 215°C (range: 190–240°C). Bed temperature: 90°C.

What bed temperature for OTHER on the Flashforge Adventurer 5M?

Set the Flashforge Adventurer 5M bed to 90°C for OTHER. The acceptable range is 85–100°C.

Use 0.5 mm retraction distance at 40 mm/s for OTHER on the Flashforge Adventurer 5M.

Set the part-cooling fan to 100% for OTHER on the Flashforge Adventurer 5M. Minimum speed: 0%.

Print OTHER at 215°C nozzle and 90°C bed on the Flashforge Adventurer 5M.Settings below cover 3 nozzle sizes (0.4mm, 0.6mm, 0.8mm).

Nozzle temp215°C190–240°C range

Bed temp90°C85–100°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge PA12-CF Flashforge	215°C 190–240°C	90°C 85–100°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA6-CF Flashforge	215°C 190–240°C	95°C 90–105°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA66-CF Flashforge	215°C 190–240°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PET-CF Flashforge	215°C 190–240°C	80°C 75–90°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.6 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge PA12-CF Flashforge	215°C 190–240°C	90°C 85–100°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA6-CF Flashforge	215°C 190–240°C	95°C 90–105°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA66-CF Flashforge	215°C 190–240°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PET-CF Flashforge	215°C 190–240°C	80°C 75–90°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.8 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge PA12-CF Flashforge	215°C 190–240°C	90°C 85–100°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA6-CF Flashforge	215°C 190–240°C	95°C 90–105°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PA66-CF Flashforge	215°C 190–240°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge PET-CF Flashforge	215°C 190–240°C	80°C 75–90°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.