What temperature for TPU on the S5?

Recommended nozzle temperature for TPU on the S5 is 225°C (range: 210–240°C). Bed temperature: 40°C.

What bed temperature for TPU on the S5?

Set the S5 bed to 40°C for TPU. The acceptable range is 30–50°C.

Use 1.5 mm retraction distance at 35 mm/s for TPU on the S5.

Set the part-cooling fan to 60% for TPU on the S5. Minimum speed: 20%.

Print TPU at 225°C nozzle and 40°C bed on the S5.Fan speed 60%, retraction 1.5mm, print speed 20mm/s.

Nozzle temp225°C210–240°C range

Bed temp40°C30–50°C range

Fan speed60%Min 20%

Print speed20 mm/sStarting point

Retraction1.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
TPU 95A Generic	225°C 210–240°C	40°C 30–50°C	60% /20%	20 mm/s	1.5 mm @ 35 mm/s	Derived

Print TPU slowly (20–30 mm/s) — the flexible nature causes feeding issues at high speeds.
Disable or minimize retraction to prevent grinding. Direct-drive extruders handle TPU much better than Bowden setups.
Dry TPU filament before printing for consistent results and to prevent stringing.