What temperature for NYLON on the S5?

Recommended nozzle temperature for NYLON on the S5 is 255°C (range: 240–270°C). Bed temperature: 75°C.

What bed temperature for NYLON on the S5?

Set the S5 bed to 75°C for NYLON. The acceptable range is 70–85°C.

Use 0.5 mm retraction distance at 35 mm/s for NYLON on the S5.

Set the part-cooling fan to 50% for NYLON on the S5. Minimum speed: 20%.

Print NYLON at 255°C nozzle and 75°C bed on the S5.Fan speed 50%, retraction 0.5mm, print speed 30mm/s.

Nozzle temp255°C240–270°C range

Bed temp75°C70–85°C range

Fan speed50%Min 20%

Print speed30 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Nylon Generic	255°C 240–270°C	75°C 70–85°C	50% /20%	30 mm/s	0.5 mm @ 35 mm/s	Derived

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.