What temperature for OTHER on the Elegoo OrangeStorm Giga?

Recommended nozzle temperature for OTHER on the Elegoo OrangeStorm Giga is 215°C (range: 190–240°C). Bed temperature: 60°C.

What bed temperature for OTHER on the Elegoo OrangeStorm Giga?

Set the Elegoo OrangeStorm Giga bed to 60°C for OTHER. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for OTHER on the Elegoo OrangeStorm Giga.

Set the part-cooling fan to 60% for OTHER on the Elegoo OrangeStorm Giga. Minimum speed: 10%.

Print OTHER at 215°C nozzle and 60°C bed on the Elegoo OrangeStorm Giga.Settings below cover 4 nozzle sizes (0.4mm, 0.6mm, 0.8mm, 1mm).

Nozzle temp215°C190–240°C range

Bed temp60°C55–70°C range

Fan speed60%Min 10%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA6-CF Generic	215°C 190–240°C	60°C 55–70°C	60% /10%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA6-CF Generic	215°C 190–240°C	60°C 55–70°C	60% /10%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA6-CF Generic	215°C 190–240°C	60°C 55–70°C	60% /10%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA6-CF Generic	215°C 190–240°C	60°C 55–70°C	60% /10%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.