What temperature for PLA on the Elegoo OrangeStorm Giga?

Recommended nozzle temperature for PLA on the Elegoo OrangeStorm Giga is 215°C (range: 190–230°C). Bed temperature: 60°C.

What bed temperature for PLA on the Elegoo OrangeStorm Giga?

Set the Elegoo OrangeStorm Giga bed to 60°C for PLA. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for PLA on the Elegoo OrangeStorm Giga.

Set the part-cooling fan to 100% for PLA on the Elegoo OrangeStorm Giga. Minimum speed: 0%.

Print PLA at 215°C nozzle and 60°C bed on the Elegoo OrangeStorm Giga.Settings below cover 4 nozzle sizes (0.4mm, 0.6mm, 0.8mm, 1mm).

Nozzle temp215°C190–230°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Elegoo PLA Elegoo PLA Basic	215°C 190–230°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Galaxy Elegoo PLA Marble · Elegoo PLA Sparkle · Elegoo PLA Wood	215°C 190–230°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Matte Elegoo	215°C 190–230°C	60°C 55–70°C	80% /60%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.6 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Elegoo PLA Elegoo PLA Basic	215°C 190–230°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Galaxy Elegoo PLA Marble · Elegoo PLA Sparkle · Elegoo PLA Wood	215°C 190–230°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Matte Elegoo	215°C 190–230°C	60°C 55–70°C	80% /60%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.8 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Elegoo PLA Elegoo PLA Basic	215°C 190–230°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Galaxy Elegoo PLA Marble · Elegoo PLA Sparkle · Elegoo PLA Wood	215°C 190–230°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Matte Elegoo	215°C 190–230°C	60°C 55–70°C	80% /60%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

1 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Elegoo PLA Elegoo PLA Basic	215°C 190–230°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Galaxy Elegoo PLA Marble · Elegoo PLA Sparkle · Elegoo PLA Wood	215°C 190–230°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Elegoo PLA Matte Elegoo	215°C 190–230°C	60°C 55–70°C	80% /60%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

PLA is the easiest filament to print. Start with the recommended 215°C nozzle temperature and adjust by ±5°C based on under/over-extrusion.
Keep fan speed at 100% for best layer adhesion and bridging performance.
Bed adhesion is excellent with a clean PEI sheet — no glue stick needed.
Lower print speed (40–50 mm/s) for detailed parts; increase to 80+ mm/s for drafts.