OTHER settings for the Centauri Carbon
Print OTHER at 215°C nozzle and 100°C bed on the Elegoo Centauri Carbon.Settings below cover 4 nozzle sizes (0.2mm, 0.4mm, 0.6mm, 0.8mm).
Recommended settings (0.4 mm brass nozzle)
Nozzle temp215°C190–240°C range
Bed temp100°C95–110°C range
Fan speed30%Min 10%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 40 mm/s
Nozzle0.4 mmbrass
Source: Official profile. ✓ Verified against official profile.
Imports directly into OrcaSlicer via File → Import → Import Configs
All nozzle sizes
0.2 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Elegoo PAHT-CF Elegoo | 215°C 190–240°C | 100°C 95–110°C | 30% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Elegoo PAHT-CF Elegoo | 215°C 190–240°C | 100°C 95–110°C | 30% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PA6-CF Generic | 215°C 190–240°C | 60°C 55–70°C | 60% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET-CF Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /30% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.6 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Elegoo PAHT-CF Elegoo | 215°C 190–240°C | 100°C 95–110°C | 30% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PA6-CF Generic | 215°C 190–240°C | 60°C 55–70°C | 60% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET-CF Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /30% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
0.8 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Elegoo PAHT-CF Elegoo | 215°C 190–240°C | 100°C 95–110°C | 30% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PA6-CF Generic | 215°C 190–240°C | 60°C 55–70°C | 60% /10% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /20% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| Generic PET-CF Generic | 215°C 190–240°C | 90°C 85–100°C | 60% /30% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
Tips for printing OTHER on the Elegoo Centauri Carbon
- Always start with the recommended temperature and adjust in 5°C increments.
- Print a temperature tower to find the optimal temperature for your specific filament brand.
- Store filament in a dry box to maintain consistent print quality.