Best 3D printers for ABS
ABS warps badly on open-frame printers. An enclosure is effectively a hard requirement — without one, large ABS prints will delaminate or peel off the bed.
Must-have
- Enclosure (closed chamber)
- Bed to 100–110°C
- Nozzle to 240°C+
Nice to have
- High-flow nozzle
- Chamber temp sensor
- Draft shield in slicer
Quick picks
Top picks
- #1245°C avg nozzle100°C avg bed300×300×300 mm1 ABS profilesNozzles: 0.4mmView K1 Max ABS settings →
- #2245°C avg nozzle100°C avg bed400×400×400 mm1 ABS profilesNozzles: 0.4mmView Artisan ABS settings →
- #3245°C avg nozzle100°C avg bed300×300×280 mm1 ABS profilesNozzles: 0.4mmView V2.4 ABS settings →
More printers for ABS
| # | Printer | Enclosure | Avg nozzle | Build volume | Profiles | |
|---|---|---|---|---|---|---|
| #4 | UltimakerS7 | ✓ | 245°C | 330×240×300 mm | 1 | Settings → |
| #5 | Bambu LabP1S | ✓ | 245°C | 256×256×256 mm | 1 | Settings → |
| #6 | VoronTrident | ✓ | 245°C | 250×250×250 mm | 1 | Settings → |
| #7 | CrealityK1 | ✓ | 245°C | 220×220×250 mm | 1 | Settings → |
| #8 | SnapmakerJ1s | ✓ | 245°C | 300×200×200 mm | 1 | Settings → |
| #9 | QidiQ1 Pro | — | 245°C | — | 12 | Settings → |
| #10 | QidiQ2 | — | 245°C | — | 10 | Settings → |
| #11 | QidiQ2C | — | 245°C | — | 10 | Settings → |
| #12 | QidiX-Max 4 | — | 245°C | — | 10 | Settings → |
| #13 | QidiX-Plus 4 | — | 245°C | — | 12 | Settings → |
| #14 | QidiX-Plus 5 | — | 245°C | — | 10 | Settings → |
| #15 | QidiX-Smart 5 | — | 245°C | — | 10 | Settings → |