ABS settings for the X-Max 4
Print ABS at 245°C nozzle and 60°C bed on the Qidi X-Max 4.Fan speed 100%, retraction 0.5mm, print speed 60mm/s. Note: this is an open-frame printer — a draft shield or enclosure accessory is recommended for ABS.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp245°C230–260°C range
Bed temp60°C55–70°C range
Fan speed100%Min 0%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 40 mm/s
Nozzle0.4 mmbrass
Source: Official profile. ✓ Verified against official profile.
Imports directly into OrcaSlicer via File → Import → Import Configs
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Bambu ABS Generic ABS · HATCHBOX ABS · Overture ABS · PolyLite ABS · QIDI ABS Odorless · QIDI ABS Rapido · QIDI ABS Rapido Metal · QIDI ABS-GF · Qidi PC-ABS-FR | 245°C 230–260°C | 60°C 55–70°C | 100% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
Tips for printing ABS on the Qidi X-Max 4
- ABS warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
- Minimize fan cooling — high fan speeds cause layer cracking in ABS.
- Increase bed temperature gradually if warping occurs: try 105–110°C.
- ABS fumes — print in a ventilated area.