Best 3D printers for ASA
ASA behaves like ABS but is UV-resistant for outdoor parts. Same enclosure requirement — without it, warping and layer delamination are common, especially on larger prints.
Must-have
- Enclosure
- Bed to 100°C+
- Nozzle to 250°C+
Nice to have
- High-temp bed surface (PEI)
- Minimal part cooling
- Draft shield
Quick picks
Top picks
- #1250°C avg nozzle60°C avg bed256×256×256 mm3 ASA profilesNozzles: 0.4mm, 0.6mm, 0.8mmView P1S ASA settings →
- #2250°C avg nozzle95°C avg bed300×300×300 mm1 ASA profilesNozzles: 0.4mmView K1 Max ASA settings →
- #3250°C avg nozzle95°C avg bed400×400×400 mm1 ASA profilesNozzles: 0.4mmView Artisan ASA settings →
More printers for ASA
| # | Printer | Enclosure | Avg nozzle | Build volume | Profiles | |
|---|---|---|---|---|---|---|
| #4 | VoronV2.4 | ✓ | 250°C | 300×300×280 mm | 1 | Settings → |
| #5 | UltimakerS7 | ✓ | 250°C | 330×240×300 mm | 1 | Settings → |
| #6 | VoronTrident | ✓ | 250°C | 250×250×250 mm | 1 | Settings → |
| #7 | CrealityK1 | ✓ | 250°C | 220×220×250 mm | 1 | Settings → |
| #8 | SnapmakerJ1s | ✓ | 250°C | 300×200×200 mm | 1 | Settings → |
| #9 | Bambu LabP1P | — | 250°C | 256×256×256 mm | 3 | Settings → |
| #10 | CrealityEnder-5 Max | — | 250°C | 400×400×400 mm | 1 | Settings → |
| #11 | CrealityK1 Max_CFS-C | — | 250°C | 300×300×300 mm | 1 | Settings → |
| #12 | PrusaXL | — | 250°C | 360×360×360 mm | 1 | Settings → |
| #13 | SovolSV06 Plus | — | 250°C | 300×300×340 mm | 1 | Settings → |
| #14 | SovolSV08 | — | 250°C | 350×350×350 mm | 1 | Settings → |
| #15 | UltimakerS5 | — | 250°C | 330×240×300 mm | 1 | Settings → |