ABS settings
Slicer settings for printing ABS filament on the V2.4. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp245°C230–260°C range
Bed temp100°C95–115°C range
Fan speed20%Min 0%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 35 mm/s
Nozzle0.4 mmbrass
Source: Derived. Based on manufacturer specifications.
All nozzle sizes
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| ABS Generic | 245°C 230–260°C | 100°C 95–115°C | 20% /0% | 60 mm/s | 0.5 mm @ 35 mm/s | Derived |
Tips for printing ABS on the V2.4
- ABS warps significantly without an enclosure — this printer has an enclosure, which helps.
- Minimize fan cooling — high fan speeds cause layer cracking in ABS.
- Increase bed temperature gradually if warping occurs: try 105–110°C.
- ABS fumes — print in a ventilated area.