What temperature for TPU on the Qidi X-Plus 5?

Recommended nozzle temperature for TPU on the Qidi X-Plus 5 is 225°C (range: 210–240°C). Bed temperature: 60°C.

What bed temperature for TPU on the Qidi X-Plus 5?

Set the Qidi X-Plus 5 bed to 60°C for TPU. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for TPU on the Qidi X-Plus 5.

Set the part-cooling fan to 100% for TPU on the Qidi X-Plus 5. Minimum speed: 0%.

Print TPU at 225°C nozzle and 60°C bed on the Qidi X-Plus 5.Fan speed 100%, retraction 0.5mm, print speed 60mm/s.

Nozzle temp225°C210–240°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic TPU 95A QIDI TPU-Aero · QIDI TPU-GF · Qidi TPU 95A-HF	225°C 210–240°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Print TPU slowly (20–30 mm/s) — the flexible nature causes feeding issues at high speeds.
Disable or minimize retraction to prevent grinding. Direct-drive extruders handle TPU much better than Bowden setups.
Dry TPU filament before printing for consistent results and to prevent stringing.