What temperature for NYLON on the Qidi X-Plus 5?

Recommended nozzle temperature for NYLON on the Qidi X-Plus 5 is 255°C (range: 240–270°C). Bed temperature: 60°C.

What bed temperature for NYLON on the Qidi X-Plus 5?

Set the Qidi X-Plus 5 bed to 60°C for NYLON. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for NYLON on the Qidi X-Plus 5.

Set the part-cooling fan to 100% for NYLON on the Qidi X-Plus 5. Minimum speed: 0%.

Print NYLON at 255°C nozzle and 60°C bed on the Qidi X-Plus 5.Fan speed 100%, retraction 0.5mm, print speed 60mm/s.

Nozzle temp255°C240–270°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
QIDI Support For PET-PA Generic	255°C 240–270°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.