What temperature for PETG on the Qidi Q2C?

Recommended nozzle temperature for PETG on the Qidi Q2C is 235°C (range: 220–250°C). Bed temperature: 60°C.

What bed temperature for PETG on the Qidi Q2C?

Set the Qidi Q2C bed to 60°C for PETG. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for PETG on the Qidi Q2C.

Set the part-cooling fan to 100% for PETG on the Qidi Q2C. Minimum speed: 0%.

Print PETG at 235°C nozzle and 60°C bed on the Qidi Q2C.Fan speed 100%, retraction 0.5mm, print speed 60mm/s.

Nozzle temp235°C220–250°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Bambu PETG Generic PETG · HATCHBOX PETG · QIDI PETG Basic · QIDI PETG Rapido · QIDI PETG Tough · QIDI PETG Translucent · QIDI PETG-CF · QIDI PETG-GF	235°C 220–250°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

PETG is hygroscopic — dry your filament before printing if stored openly for more than a week.
Reduce fan speed to 25–50% for better layer adhesion. Too much cooling causes layer delamination.
Use a higher first-layer height (0.25–0.3 mm) and reduce first-layer speed for better adhesion.
PETG sticks aggressively to PEI — use a thin layer of glue stick or hairspray as release agent.