What temperature for TPU on the Artillery Sidewinder X4 Plus?

Recommended nozzle temperature for TPU on the Artillery Sidewinder X4 Plus is 225°C (range: 210–240°C). Bed temperature: 45°C.

What bed temperature for TPU on the Artillery Sidewinder X4 Plus?

Set the Artillery Sidewinder X4 Plus bed to 45°C for TPU. The acceptable range is 40–55°C.

Use 1.3 mm retraction distance at 40 mm/s for TPU on the Artillery Sidewinder X4 Plus.

Set the part-cooling fan to 100% for TPU on the Artillery Sidewinder X4 Plus. Minimum speed: 100%.

Print TPU at 225°C nozzle and 45°C bed on the Artillery Sidewinder X4 Plus.Fan speed 100%, retraction 1.3mm, print speed 60mm/s.

Nozzle temp225°C210–240°C range

Bed temp45°C40–55°C range

Fan speed100%Min 100%

Print speed60 mm/sStarting point

Retraction1.3 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Artillery TPU Artillery	225°C 210–240°C	45°C 40–55°C	100% /100%	60 mm/s	1.3 mm @ 40 mm/s	Official profile

Print TPU slowly (20–30 mm/s) — the flexible nature causes feeding issues at high speeds.
Disable or minimize retraction to prevent grinding. Direct-drive extruders handle TPU much better than Bowden setups.
Dry TPU filament before printing for consistent results and to prevent stringing.