What temperature for ASA on the Artisan?

Recommended nozzle temperature for ASA on the Artisan is 250°C (range: 240–265°C). Bed temperature: 95°C.

What bed temperature for ASA on the Artisan?

Set the Artisan bed to 95°C for ASA. The acceptable range is 90–105°C.

Use 0.5 mm retraction distance at 35 mm/s for ASA on the Artisan.

Set the part-cooling fan to 20% for ASA on the Artisan. Minimum speed: 0%.

Print ASA at 250°C nozzle and 95°C bed on the Artisan.Fan speed 20%, retraction 0.5mm, print speed 40mm/s.

Nozzle temp250°C240–265°C range

Bed temp95°C90–105°C range

Fan speed20%Min 0%

Print speed40 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
ASA Generic	250°C 240–265°C	95°C 90–105°C	20% /0%	40 mm/s	0.5 mm @ 35 mm/s	Derived

ASA warps significantly without an enclosure — this printer has an enclosure, which helps.
Minimize fan cooling — high fan speeds cause layer cracking in ASA.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ASA is UV-resistant and suitable for outdoor parts.