SV06 vs S3
Specs, filament support, and slicer settings compared
Build volume220×220×250 mm12 cm³
Max nozzle300°C
Max bed110°C
EnclosureOpen frame
Filament types7
Build volume230×190×200 mm9 cm³
Max nozzle280°C
Max bed110°C
EnclosureOpen frame
Filament types7
Filament settings comparison
7 shared filament types — avg recommended temperatures
| Filament | SV06 nozzle | S3 nozzle | SV06 bed | S3 bed | |
|---|---|---|---|---|---|
| PLA | 215°C | 215°C | 60°C | 60°C | A·B |
| PLA+ | 225°C | 225°C | 65°C | 65°C | A·B |
| PETG | 235°C | 235°C | 80°C | 80°C | A·B |
| ABS | 245°C | 245°C | 100°C | 100°C | A·B |
| ASA | 250°C | 250°C | 95°C | 95°C | A·B |
| TPU | 225°C | 225°C | 40°C | 40°C | A·B |
| NYLON | 255°C | 255°C | 75°C | 75°C | A·B |
Higher nozzle temp shown in orange. Links A/B open the full settings page.