What temperature for PLA+ on the SV06?

Recommended nozzle temperature for PLA+ on the SV06 is 225°C (range: 200–235°C). Bed temperature: 65°C.

What bed temperature for PLA+ on the SV06?

Set the SV06 bed to 65°C for PLA+. The acceptable range is 55–72°C.

Use 0.5 mm retraction distance at 35 mm/s for PLA+ on the SV06.

Set the part-cooling fan to 100% for PLA+ on the SV06. Minimum speed: 80%.

Print PLA+ at 225°C nozzle and 65°C bed on the SV06.Fan speed 100%, retraction 0.5mm, print speed 45mm/s.

Nozzle temp225°C200–235°C range

Bed temp65°C55–72°C range

Fan speed100%Min 80%

Print speed45 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
PLA+ Generic	225°C 200–235°C	65°C 55–72°C	100% /80%	45 mm/s	0.5 mm @ 35 mm/s	Derived

PLA+ prints like PLA but requires 5–10°C more nozzle temperature for full strength — start at the recommended 225°C.
Keep fan at 80–100% for best layer bonding and bridging performance.
PLA+ is stiffer and less brittle than standard PLA — good for functional parts that don't need high heat resistance.
If you see elephant's foot on the first layer, raise the Z offset slightly or reduce first-layer flow to 95%.