What temperature for OTHER on the Anycubic Kobra S1?

Recommended nozzle temperature for OTHER on the Anycubic Kobra S1 is 215°C (range: 190–240°C). Bed temperature: 40°C.

What bed temperature for OTHER on the Anycubic Kobra S1?

Set the Anycubic Kobra S1 bed to 40°C for OTHER. The acceptable range is 35–50°C.

Use 1 mm retraction distance at 40 mm/s for OTHER on the Anycubic Kobra S1.

Set the part-cooling fan to 30% for OTHER on the Anycubic Kobra S1. Minimum speed: 0%.

Print OTHER at 215°C nozzle and 40°C bed on the Anycubic Kobra S1.Fan speed 30%, retraction 1mm, print speed 60mm/s.

Nozzle temp215°C190–240°C range

Bed temp40°C35–50°C range

Fan speed30%Min 0%

Print speed60 mm/sStarting point

Retraction1 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Fiberon PA6-CF20 Generic	215°C 190–240°C	40°C 35–50°C	30% /0%	60 mm/s	1 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.