NYLON settings
Slicer settings for printing NYLON filament on the V2.4. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp255°C240–270°C range
Bed temp80°C70–90°C range
Fan speed50%Min 20%
Print speed40 mm/sStarting point
Retraction0.5 mmAt 35 mm/s
Nozzle0.4 mmbrass
Source: Derived. Based on manufacturer specifications.
All nozzle sizes
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Nylon Generic | 255°C 240–270°C | 80°C 70–90°C | 50% /20% | 40 mm/s | 0.5 mm @ 35 mm/s | Derived |
Tips for printing NYLON on the V2.4
- Dry your filament immediately before printing — NYLON is extremely hygroscopic.
- An enclosure is available on this printer and strongly recommended.
- Use a hardened steel nozzle for filled variants (glass-fiber, carbon-fiber).