What temperature for PC on the S7?

Recommended nozzle temperature for PC on the S7 is 275°C (range: 260–290°C). Bed temperature: 110°C.

What bed temperature for PC on the S7?

Set the S7 bed to 110°C for PC. The acceptable range is 105–120°C.

Use 0.5 mm retraction distance at 35 mm/s for PC on the S7.

Set the part-cooling fan to 15% for PC on the S7. Minimum speed: 0%.

Print PC at 275°C nozzle and 110°C bed on the S7.Fan speed 15%, retraction 0.5mm, print speed 40mm/s.

Nozzle temp275°C260–290°C range

Bed temp110°C105–120°C range

Fan speed15%Min 0%

Print speed40 mm/sStarting point

Retraction0.5 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
PC Generic	275°C 260–290°C	110°C 105–120°C	15% /0%	40 mm/s	0.5 mm @ 35 mm/s	Derived

Dry your filament immediately before printing — PC is extremely hygroscopic. Even 2–3 hours of moisture exposure degrades print quality.
This printer has an enclosure — keep it closed throughout the print to maintain chamber temperature.
Use a hardened steel nozzle for filled variants (glass-fiber, carbon-fiber) — standard brass wears quickly.
PC is one of the most warp-prone materials. A brim of at least 5mm and an enclosure chamber above 45°C are strongly recommended.