What temperature for NYLON on the Mini+?

Recommended nozzle temperature for NYLON on the Mini+ is 255°C (range: 240–270°C). Bed temperature: 80°C.

What bed temperature for NYLON on the Mini+?

Set the Mini+ bed to 80°C for NYLON. The acceptable range is 70–90°C.

What retraction settings for NYLON on the Mini+?

Use 0.4 mm retraction distance at 35 mm/s for NYLON on the Mini+.

What fan speed for NYLON on the Mini+?

Set the part-cooling fan to 60% for NYLON on the Mini+. Minimum speed: 30%.

Mini+NYLON settings

Slicer settings for printing NYLON filament on the Mini+. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp255°C240–270°C range

Bed temp80°C70–90°C range

Fan speed60%Min 30%

Print speed35 mm/sStarting point

Retraction0.4 mmAt 35 mm/s

Nozzle0.4 mmbrass

Source: Derived. Based on manufacturer specifications.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Nylon Generic	255°C 240–270°C	80°C 70–90°C	60% /30%	35 mm/s	0.4 mm @ 35 mm/s	Derived

Tips for printing NYLON on the Mini+

Dry your filament immediately before printing — NYLON is extremely hygroscopic.
An enclosure is not built-in; build or buy one to prevent warping.
Use a hardened steel nozzle for filled variants (glass-fiber, carbon-fiber).

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing NYLON on the Mini+