What temperature for NYLON on the Flashforge Guider4?

Recommended nozzle temperature for NYLON on the Flashforge Guider4 is 255°C (range: 240–270°C). Bed temperature: 100°C.

What bed temperature for NYLON on the Flashforge Guider4?

Set the Flashforge Guider4 bed to 100°C for NYLON. The acceptable range is 95–110°C.

Use 0.5 mm retraction distance at 40 mm/s for NYLON on the Flashforge Guider4.

Set the part-cooling fan to 60% for NYLON on the Flashforge Guider4. Minimum speed: 30%.

Print NYLON at 255°C nozzle and 100°C bed on the Flashforge Guider4.Fan speed 60%, retraction 0.5mm, print speed 60mm/s.

Nozzle temp255°C240–270°C range

Bed temp100°C95–110°C range

Fan speed60%Min 30%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge PA Flashforge PA-CF	255°C 240–270°C	100°C 95–110°C	60% /30%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.