What temperature for PLA on the Flashforge Guider4 0.4 HF nozzle?

Recommended nozzle temperature for PLA on the Flashforge Guider4 0.4 HF nozzle is 215°C (range: 190–230°C). Bed temperature: 55°C.

What bed temperature for PLA on the Flashforge Guider4 0.4 HF nozzle?

Set the Flashforge Guider4 0.4 HF nozzle bed to 55°C for PLA. The acceptable range is 50–65°C.

Use 0.5 mm retraction distance at 40 mm/s for PLA on the Flashforge Guider4 0.4 HF nozzle.

Set the part-cooling fan to 100% for PLA on the Flashforge Guider4 0.4 HF nozzle. Minimum speed: 100%.

Print PLA at 215°C nozzle and 55°C bed on the Flashforge Guider4 0.4 HF nozzle.Fan speed 100%, retraction 0.5mm, print speed 60mm/s.

Nozzle temp215°C190–230°C range

Bed temp55°C50–65°C range

Fan speed100%Min 100%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge HS PLA Flashforge HS PLA Burnt Ti · Flashforge PLA Basic · Flashforge PLA Color Change · Flashforge PLA Galaxy · Flashforge PLA Luminous · Flashforge PLA Matte · Flashforge PLA Metal · Flashforge PLA Pro · Flashforge PLA Silk · Flashforge PLA Sparkle	215°C 190–230°C	55°C 50–65°C	100% /100%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

PLA is the easiest filament to print. Start with the recommended 215°C nozzle temperature and adjust by ±5°C based on under/over-extrusion.
Keep fan speed at 100% for best layer adhesion and bridging performance.
Bed adhesion is excellent with a clean PEI sheet — no glue stick needed.
Lower print speed (40–50 mm/s) for detailed parts; increase to 80+ mm/s for drafts.