What temperature for ASA on the Flashforge Adventurer 5M Pro?

Recommended nozzle temperature for ASA on the Flashforge Adventurer 5M Pro is 250°C (range: 240–265°C). Bed temperature: 60°C.

What bed temperature for ASA on the Flashforge Adventurer 5M Pro?

Set the Flashforge Adventurer 5M Pro bed to 60°C for ASA. The acceptable range is 55–70°C.

What retraction settings for ASA on the Flashforge Adventurer 5M Pro?

Use 0.5 mm retraction distance at 40 mm/s for ASA on the Flashforge Adventurer 5M Pro.

What fan speed for ASA on the Flashforge Adventurer 5M Pro?

Set the part-cooling fan to 100% for ASA on the Flashforge Adventurer 5M Pro. Minimum speed: 0%.

Flashforge › Adventurer 5M Pro

ASA settings for the Adventurer 5M Pro

Print ASA at 250°C nozzle and 60°C bed on the Flashforge Adventurer 5M Pro.Settings below cover 4 nozzle sizes (0.25mm, 0.4mm, 0.6mm, 0.8mm). Note: this is an open-frame printer — a draft shield or enclosure accessory is recommended for ASA.

Nozzle temp250°C240–265°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

All nozzle sizes

0.25 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge ASA Basic Flashforge	250°C 240–265°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge ASA Basic Flashforge	250°C 240–265°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge ASA-CF Flashforge	250°C 240–265°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.6 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge ASA Basic Flashforge	250°C 240–265°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge ASA-CF Flashforge	250°C 240–265°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

0.8 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Flashforge ASA Basic Flashforge	250°C 240–265°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile
Flashforge ASA-CF Flashforge	250°C 240–265°C	100°C 95–110°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Tips for printing ASA on the Flashforge Adventurer 5M Pro

ASA warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
Minimize fan cooling — high fan speeds cause layer cracking in ASA.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ASA is UV-resistant and suitable for outdoor parts.

Recommended settings (0.4 mm brass nozzle)