What temperature for NYLON on the Elegoo Centauri Carbon 2?

Recommended nozzle temperature for NYLON on the Elegoo Centauri Carbon 2 is 255°C (range: 240–270°C). Bed temperature: 60°C.

What bed temperature for NYLON on the Elegoo Centauri Carbon 2?

Set the Elegoo Centauri Carbon 2 bed to 60°C for NYLON. The acceptable range is 55–70°C.

Use 0.5 mm retraction distance at 40 mm/s for NYLON on the Elegoo Centauri Carbon 2.

Set the part-cooling fan to 100% for NYLON on the Elegoo Centauri Carbon 2. Minimum speed: 80%.

Print NYLON at 255°C nozzle and 60°C bed on the Elegoo Centauri Carbon 2.Settings below cover 3 nozzle sizes (0.4mm, 0.6mm, 0.8mm).

Nozzle temp255°C240–270°C range

Bed temp60°C55–70°C range

Fan speed100%Min 80%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA Generic	255°C 240–270°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA Generic	255°C 240–270°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA Generic	255°C 240–270°C	60°C 55–70°C	100% /80%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Always start with the recommended temperature and adjust in 5°C increments.
Print a temperature tower to find the optimal temperature for your specific filament brand.
Store filament in a dry box to maintain consistent print quality.