Supported materials
Select a filament type to see detailed temperature, speed, and retraction settings.
- PLAPLA filament215°C nozzle · 55°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- PLA+PLA+ filament225°C nozzle · 50°C bedNozzle sizes: 0.4mmView settings →
- PETGPETG filament235°C nozzle · 70°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- ABSABS filament245°C nozzle · 83°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- ASAASA filament250°C nozzle · 74°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- TPUTPU filament225°C nozzle · 40°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- NYLONNYLON filament255°C nozzle · 58°C bedNozzle sizes: 0.2mm, 0.4mm, 0.6mm, 0.8mmView settings →
- PCPC filament275°C nozzle · 60°C bedNozzle sizes: 0.4mmView settings →
- OTHEROTHER filament215°C nozzle · 58°C bedNozzle sizes: 0.4mm, 0.6mm, 0.8mmView settings →
About these settings
Settings are sourced from official slicer profiles (Bambu Studio, PrusaSlicer) and verified manufacturer specifications. Nozzle temperatures show the range the printer hardware supports for that material; always verify against your specific filament brand.
Recommended values are starting points — tune layer height, cooling, and speed to match your filament brand and printing environment.