What temperature for ASA on the Creality K1 Max (0.6 nozzle)?

Recommended nozzle temperature for ASA on the Creality K1 Max (0.6 nozzle) is 250°C (range: 240–265°C). Bed temperature: 60°C.

What bed temperature for ASA on the Creality K1 Max (0.6 nozzle)?

Set the Creality K1 Max (0.6 nozzle) bed to 60°C for ASA. The acceptable range is 55–70°C.

What retraction settings for ASA on the Creality K1 Max (0.6 nozzle)?

Use 0.5 mm retraction distance at 40 mm/s for ASA on the Creality K1 Max (0.6 nozzle).

What fan speed for ASA on the Creality K1 Max (0.6 nozzle)?

Set the part-cooling fan to 100% for ASA on the Creality K1 Max (0.6 nozzle). Minimum speed: 0%.

Creality K1 Max (0.6 nozzle)ASA settings

Slicer settings for printing ASA filament on the Creality K1 Max (0.6 nozzle). Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp250°C240–265°C range

Bed temp60°C55–70°C range

Fan speed100%Min 0%

Print speed60 mm/sStarting point

Retraction0.5 mmAt 40 mm/s

Nozzle0.6 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.6 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic ASA Generic	250°C 240–265°C	60°C 55–70°C	100% /0%	60 mm/s	0.5 mm @ 40 mm/s	Official profile

Tips for printing ASA on the Creality K1 Max (0.6 nozzle)

ASA warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
Minimize fan cooling — high fan speeds cause layer cracking in ASA.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ASA is UV-resistant and suitable for outdoor parts.

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.6 mm nozzle

Tips for printing ASA on the Creality K1 Max (0.6 nozzle)