ASA settings
Slicer settings for printing ASA filament on the Creality K1_CFS-C. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.
Recommended settings (0.4 mm brass nozzle)
Nozzle temp250°C240–265°C range
Bed temp100°C95–110°C range
Fan speed60%Min 0%
Print speed60 mm/sStarting point
Retraction0.5 mmAt 40 mm/s
Nozzle0.4 mmbrass
Source: Official profile. ✓ Verified against official profile.
All nozzle sizes
0.4 mm nozzle
| Filament | Nozzle temp | Bed temp | Fan | Speed | Retraction | Source |
|---|---|---|---|---|---|---|
| Generic ASA Generic | 250°C 240–265°C | 100°C 95–110°C | 60% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
| HP-ASA Generic | 250°C 240–265°C | 100°C 95–110°C | 60% /0% | 60 mm/s | 0.5 mm @ 40 mm/s | Official profile |
Tips for printing ASA on the Creality K1_CFS-C
- ASA warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
- Minimize fan cooling — high fan speeds cause layer cracking in ASA.
- Increase bed temperature gradually if warping occurs: try 105–110°C.
- ASA is UV-resistant and suitable for outdoor parts.