What temperature for NYLON on the Creality Ender-5 Max?

Recommended nozzle temperature for NYLON on the Creality Ender-5 Max is 255°C (range: 240–270°C). Bed temperature: 45°C.

What bed temperature for NYLON on the Creality Ender-5 Max?

Set the Creality Ender-5 Max bed to 45°C for NYLON. The acceptable range is 40–55°C.

What retraction settings for NYLON on the Creality Ender-5 Max?

Use 1.5 mm retraction distance at 40 mm/s for NYLON on the Creality Ender-5 Max.

What fan speed for NYLON on the Creality Ender-5 Max?

Set the part-cooling fan to 100% for NYLON on the Creality Ender-5 Max. Minimum speed: 100%.

Creality Ender-5 MaxNYLON settings

Slicer settings for printing NYLON filament on the Creality Ender-5 Max. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp255°C240–270°C range

Bed temp45°C40–55°C range

Fan speed100%Min 100%

Print speed60 mm/sStarting point

Retraction1.5 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Generic PA Generic	255°C 240–270°C	45°C 40–55°C	100% /100%	60 mm/s	1.5 mm @ 40 mm/s	Official profile

Tips for printing NYLON on the Creality Ender-5 Max

Dry your filament immediately before printing — NYLON is extremely hygroscopic.
An enclosure is not built-in; build or buy one to prevent warping.
Use a hardened steel nozzle for filled variants (glass-fiber, carbon-fiber).

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing NYLON on the Creality Ender-5 Max