What temperature for PLA on the Artillery Sidewinder X3 Pro?

Recommended nozzle temperature for PLA on the Artillery Sidewinder X3 Pro is 215°C (range: 190–230°C). Bed temperature: 60°C.

What bed temperature for PLA on the Artillery Sidewinder X3 Pro?

Set the Artillery Sidewinder X3 Pro bed to 60°C for PLA. The acceptable range is 55–70°C.

Use 1.3 mm retraction distance at 40 mm/s for PLA on the Artillery Sidewinder X3 Pro.

Set the part-cooling fan to 80% for PLA on the Artillery Sidewinder X3 Pro. Minimum speed: 60%.

Print PLA at 215°C nozzle and 60°C bed on the Artillery Sidewinder X3 Pro.Fan speed 80%, retraction 1.3mm, print speed 60mm/s.

Nozzle temp215°C190–230°C range

Bed temp60°C55–70°C range

Fan speed80%Min 60%

Print speed60 mm/sStarting point

Retraction1.3 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Artillery PLA Basic Artillery PLA Matte · Artillery PLA Silk	215°C 190–230°C	60°C 55–70°C	80% /60%	60 mm/s	1.3 mm @ 40 mm/s	Official profile
Artillery PLA Tough Artillery	215°C 190–230°C	65°C 60–75°C	80% /60%	60 mm/s	1.3 mm @ 40 mm/s	Official profile

PLA is the easiest filament to print. Start with the recommended 215°C nozzle temperature and adjust by ±5°C based on under/over-extrusion.
Keep fan speed at 100% for best layer adhesion and bridging performance.
Bed adhesion is excellent with a clean PEI sheet — no glue stick needed.
Lower print speed (40–50 mm/s) for detailed parts; increase to 80+ mm/s for drafts.