What temperature for ABS on the Artillery Sidewinder X3 Plus?

Recommended nozzle temperature for ABS on the Artillery Sidewinder X3 Plus is 245°C (range: 230–260°C). Bed temperature: 100°C.

What bed temperature for ABS on the Artillery Sidewinder X3 Plus?

Set the Artillery Sidewinder X3 Plus bed to 100°C for ABS. The acceptable range is 95–110°C.

What retraction settings for ABS on the Artillery Sidewinder X3 Plus?

Use 1.3 mm retraction distance at 40 mm/s for ABS on the Artillery Sidewinder X3 Plus.

What fan speed for ABS on the Artillery Sidewinder X3 Plus?

Set the part-cooling fan to 20% for ABS on the Artillery Sidewinder X3 Plus. Minimum speed: 10%.

Artillery › Sidewinder X3 Plus

ABS settings for the Sidewinder X3 Plus

Print ABS at 245°C nozzle and 100°C bed on the Artillery Sidewinder X3 Plus.Fan speed 20%, retraction 1.3mm, print speed 60mm/s. Note: this is an open-frame printer — a draft shield or enclosure accessory is recommended for ABS.

Nozzle temp245°C230–260°C range

Bed temp100°C95–110°C range

Fan speed20%Min 10%

Print speed60 mm/sStarting point

Retraction1.3 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

Imports directly into OrcaSlicer via File → Import → Import Configs

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Artillery ABS Artillery	245°C 230–260°C	100°C 95–110°C	20% /10%	60 mm/s	1.3 mm @ 40 mm/s	Official profile

Tips for printing ABS on the Artillery Sidewinder X3 Plus

ABS warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
Minimize fan cooling — high fan speeds cause layer cracking in ABS.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ABS fumes — print in a ventilated area.

Recommended settings (0.4 mm brass nozzle)

0.4 mm nozzle

Tips for printing ABS on the Artillery Sidewinder X3 Plus

Other filaments for the Artillery Sidewinder X3 Plus

Other printers that support ABS