What temperature for ASA on the Anycubic Kobra 3 V2?

Recommended nozzle temperature for ASA on the Anycubic Kobra 3 V2 is 250°C (range: 240–265°C). Bed temperature: 100°C.

What bed temperature for ASA on the Anycubic Kobra 3 V2?

Set the Anycubic Kobra 3 V2 bed to 100°C for ASA. The acceptable range is 95–110°C.

What retraction settings for ASA on the Anycubic Kobra 3 V2?

Use 2 mm retraction distance at 40 mm/s for ASA on the Anycubic Kobra 3 V2.

What fan speed for ASA on the Anycubic Kobra 3 V2?

Set the part-cooling fan to 15% for ASA on the Anycubic Kobra 3 V2. Minimum speed: 1%.

Anycubic Kobra 3 V2ASA settings

Slicer settings for printing ASA filament on the Anycubic Kobra 3 V2. Nozzle temperature, bed temperature, fan speed, retraction, and print speed — sourced from official slicer profiles.

Nozzle temp250°C240–265°C range

Bed temp100°C95–110°C range

Fan speed15%Min 1%

Print speed60 mm/sStarting point

Retraction2 mmAt 40 mm/s

Nozzle0.4 mmbrass

Source: Official profile. ✓ Verified against official profile.

All nozzle sizes

0.4 mm nozzle

Filament	Nozzle temp	Bed temp	Fan	Speed	Retraction	Source
Anycubic ASA Anycubic	250°C 240–265°C	100°C 95–110°C	15% /1%	60 mm/s	2 mm @ 40 mm/s	Official profile

Tips for printing ASA on the Anycubic Kobra 3 V2

ASA warps significantly without an enclosure — this printer is open-frame; use a draft shield or enclosure accessory.
Minimize fan cooling — high fan speeds cause layer cracking in ASA.
Increase bed temperature gradually if warping occurs: try 105–110°C.
ASA is UV-resistant and suitable for outdoor parts.

Recommended settings (0.4 mm brass nozzle)

All nozzle sizes

0.4 mm nozzle

Tips for printing ASA on the Anycubic Kobra 3 V2