Best 3D printers for PLA
PLA is the most forgiving filament — almost any printer handles it. Focus on build volume and profile depth rather than enclosure or high-temp specs.
Must-have
- Heated bed (optional but helpful for adhesion)
- 0.4mm brass nozzle
Nice to have
- Part cooling fan
- Direct-drive or Bowden both work fine
Quick picks
Top picks
- #1215°C avg nozzle65°C avg bed256×256×256 mm14 PLA profilesNozzles: 0.4mm, 0.6mm, 0.8mmView A1 PLA settings →
- #2215°C avg nozzle60°C avg bed256×256×256 mm11 PLA profilesNozzles: 0.4mm, 0.6mm, 0.8mmView P1S PLA settings →
- #3Open frame215°C avg nozzle50°C avg bed300×300×300 mm6 PLA profilesNozzles: 0.4mmView K1 Max_CFS-C PLA settings →
More printers for PLA
| # | Printer | Enclosure | Avg nozzle | Build volume | Profiles | |
|---|---|---|---|---|---|---|
| #4 | Bambu LabP1P | — | 215°C | 256×256×256 mm | 7 | Settings → |
| #5 | AnycubicKobra 3 V2 | — | 215°C | — | 10 | Settings → |
| #6 | Bambu LabH2C | — | 215°C | — | 14 | Settings → |
| #7 | Bambu LabH2D | — | 215°C | — | 14 | Settings → |
| #8 | Bambu LabH2S | — | 215°C | — | 14 | Settings → |
| #9 | Bambu LabH3C | — | 215°C | — | 12 | Settings → |
| #10 | Bambu LabP2S | — | 215°C | — | 12 | Settings → |
| #11 | Bambu LabX1 | — | 215°C | — | 14 | Settings → |
| #12 | Bambu LabX2D | — | 215°C | — | 11 | Settings → |
| #13 | ElegooCentauri | — | 215°C | — | 10 | Settings → |
| #14 | ElegooCentauri 2 | — | 215°C | — | 12 | Settings → |
| #15 | ElegooCentauri Carbon | — | 215°C | — | 11 | Settings → |