Best 3D Printer for Nylon (2025)
Nylon requires three things no budget printer provides: an all-metal hotend, an enclosed chamber, and a bed that holds above 70 °C. These five printers check all three boxes — ranked from best-value to no-compromise.
- All-metal hotend (no PTFE above the heat break)
- Nozzle temp ≥ 270 °C (hardened steel for PA-CF/PA-GF variants)
- Heated bed ≥ 90 °C
- Enclosed chamber maintaining 40–55 °C
- Dry filament — 8–12 h at 70–80 °C before printing
Top 5 printers for nylon
Sealed enclosure, AMS multi-material, and 300 °C hotend straight from the factory. The P1S profile library includes PA and PA-CF. No modifications required.
Purpose-built for engineering filaments. Larger build volume (325×315×315 mm) than the P1S, with an active heating system and 350 °C hotend. Underrated for PA-CF and PC.
Excellent with the official Prusa Enclosure. Open-source firmware and extensive community nylon profiles. Best for users who want to tune settings manually.
Not fully sealed, but the K1 Max runs hot enough and large enough (300×300×300 mm) for many nylon jobs. Best for large flat parts where chamber temp matters less.
Self-sourced or kit-built. Best chamber retention of any consumer-adjacent printer. Steep build complexity but unmatched nylon reliability once tuned.
Nylon print settings reference
Frequently asked questions
What 3D printer is best for nylon?
The Bambu P1S is the best enclosed printer for nylon at a consumer price point — sealed enclosure, 300 °C max nozzle, and automatic AMS material management. The Qidi X-Max 3 is the best budget pick specifically for high-temp engineering materials including nylon.
Can you print nylon without an enclosure?
Nylon can warp severely without an enclosure maintaining 40–55 °C chamber temperature. Short, flat prints may succeed without enclosure, but tall models with large surface areas will almost always delaminate or lift. An enclosure is effectively mandatory for reliable nylon printing.
What temperature does nylon print at?
Nylon typically prints at 250–270 °C nozzle temperature (some grades up to 280 °C) with a 70–90 °C bed. An all-metal hotend is required — PTFE-lined hotends degrade above 240 °C and emit fumes.
Does nylon need to be dried before printing?
Yes — nylon is hygroscopic and absorbs moisture from air within hours. Wet nylon causes bubbling, stringing, and poor layer adhesion. Dry it at 70–80 °C for 8–12 hours before printing and store in an airtight container with desiccant. A filament dryer running during the print is ideal.
What nozzle do I need for nylon?
Standard brass nozzles work for unfilled nylon. For carbon-fiber nylon (PA-CF) or glass-fiber nylon (PA-GF), use a hardened steel nozzle (0.4 mm minimum) — abrasive fibers destroy brass in a few hundred grams.